Administering Routes 14-5
This example shows a routing table:
Flushing all Routes Flushing deletes all dynamically learned routes from the routing table.
To flush all learned routes, from the top level of the Administration
Console, enter:
appletalk route flush
The dynamically learned routes are removed from the routing table.
AppleTalk forwarding is enabled.
Network Range Distance Interface State
1-1 10 1 good
3 4 1 good
10-14 6 1 good
15-19 7 1 good
61 6 1 good
100-100 10 1 good
201-300 7 1 good
2010-2015 2 1 good
10009-10009 5 1 good
10010-10010 7 1 good
10060-10060 8 1 good
10110-10113 5 1 good
10116-10117 5 1 good
10118-10118 6 1 good
10119-10119 4 1 good
10120-10120 7 1 good
10122-10122 9 1 good
10310-10329 10 1 good
10410-10410 8 1 good
11010-11019 9 1 good
Top-Level Menu
system
ethernet
fddi
atm
bridge
ip
ipx
➧appletalk
snmp
analyzer
script
logout
interface
➧route
aarp
zone
forwarding
checksum
ping
statistics
display
➧flush
To Next Page
Loading...
