10-14 CHAPTER 10: ADMINISTERING IP ROUTING
Removing an ATM
ARP Server
To delete a currently defined ATM ARP server, from the top level of the
Administration Console, enter:
ip atmArpServer remove
The system prompts you for one or more of the index numbers associated
with the ATM ARP servers that you want to remove. The ATM ARP server
display shows the index number assigned to each ATM ARP server. The
system also displays the current index numbers in brackets.
Example:
Select ATM ARP server index(es) [1-2,all]: 1
Displaying the ATM
ARP Cache
To display the contents of the ATM ARP cache, from the top level of the
Administration Console, enter:
ip atmArpServer arp display
Example:
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
ospf
rip
ping
statistics
display
define
➧remove
arp
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
ospf
rip
ping
statistics
display
define
remove
➧arp
➧display
remove
flush
IP routing is enabled, RIP is active,
ICMP router discovery is disabled
IP address ATM Address Circuit
158.101.112.2 47-005-80-ffe100-0000-f21a-2130-80000212d0f-18 1/32
158.101.112.7 47-005-80-ffe100-0000-f22a-2130-80000211d01-18 1/33
158.101.116.7 47-005-81-ffe100-0000-f21a-2130-80000112d01-18 2/20
158.101.112.14 47-005-81-ffe100-0000-f21a-2130-80000112d01-18 2/22
To Next Page
Loading...
