3Com CoreBuilder 2500 - Displaying Router Lsas

13-16 CHAPTER 13: ADMINISTERING OSPF ROUTING
Displaying
Router LSAs
Use this command to show the router LSAs in the link state database.
To display a link state router information summary:
1 From the top level of the Administration Console, enter:
ip ospf linkStateData router
2 Enter the area ID.
3 Enter the area mask.
4 Enter the LSID.
5 Enter the LSID mask.
The following sample shows link state database router information:
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧ospf
rip
ping
statistics
areas
defaultRouteMetric
interface
➧linkStateData
neighbors
routerID
partition
stubDefaultMetric
virtualLinks
statistics
databaseSummary
➧router
network
summary
external
OSPF router links
LSID Router ID LS Seq LS Age Flags
158.101.142.1 158.101.142.1* 8000002E 335 ASBR
Link Type Link ID Link Data Metric
Transit Net 158.101.142.254 158.101.142.1 1
LSID Router ID LS Seq LS Age Flags
158.101.142.254 158.101.142.254 80000019 330
Link Type Link ID Link Data Metric
Transit Net 158.101.142.254 158.101.142.254 1