Configuring OSPF Interfaces 13-7
Displaying OSPF
Interface Information
The OSPF interface summary and detail displays contain information
about the system’s OSPF interface configuration.
To display OSPF interface configuration information, from the top level of
the Administration Console, enter:
ip ospf interface summary
OR
ip ospf interface detail
The following sample shows an OSPF interface summary:
The following sample shows an OSPF interface detail:
Table 13-2 lists the fields for the OSPF displays.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧ospf
rip
ping
statistics
areas
defaultRouteMetric
➧interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
virtualLinks
statistics
➧summary
➧detail
statistics
mode
priority
areaID
cost
delay
hello
retransmit
dead
password
OSPF interface summary information
Xmit Xmit Hello Rxmit Dead
Indx Pri AreaID Cost Delay Intvl Intvl Intvl Password
1 1 0.0.0.0 1 1 10 5 40 No Password
2 1 158.101.0.0 1 1 10 5 40 No Password
OSPF interface detail information
Indx IP Address State DR BDR Notes
1 158.101.112.113 Off 0.0.0.0 0.0.0.0
2 158.101.142.1 BDR 158.101.142.254 158.101.142.1 RouterID
Table 13-2 Field Attributes for the OSPF Interface Displays
Field Description
Indx Interface entry index, which corresponds to the IP interface index
Pri OSPF router priority for the interface
Area ID OSPF area to which the interface belongs
Xmit Cost Interface transmit cost
Xmit Delay Interface transmit delay
Hello Intvl OSPF hello packet transmit interval for the interface
Rxmit Intvl LSA retransmit interval
Dead Intvl Time interval before OSPF declares that a neighbor is dead
(continued)
To Next Page
Loading...
