Administering Virtual Links 13-27
To define a virtual link:
1 From the top level of the Administration Console, enter:
ip ospf virtualLinks define
2 Enter the IP interface index.
3 Enter the router ID of the destination router.
4 Enter the retransmit interval.
Example:
Select IP interface index {1-2}: 1
Enter destination router ID []: 192.42.95.254
Enter retransmit interval [50]: 100
Modifying
Virtual Links
Use this command to modify a virtual link.
To modify virtual link parameters:
1 From the top level of the Administration Console, enter:
ip ospf virtualLinks modify
2 Enter the IP address of the destination router.
3 Enter the retransmit interval, in seconds.
Example:
Select IP interface index {1-2}: 1
Enter destination router ID [192.42.95.254]: 192.42.95.150
Enter retransmit interval [50]: 75
Removing
Virtual Links
Use this command to remove a virtual link.
To remove a virtual link, from the top level of the Administration Console,
enter:
ip ospf virtualLinks remove
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧ospf
rip
ping
statistics
areas
defaultRouteMetric
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
➧virtualLinks
statistics
display
➧define
modify
remove
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧ospf
rip
ping
statistics
areas
defaultRouteMetric
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
➧virtualLinks
statistics
display
define
➧modify
remove
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧ospf
rip
ping
statistics
areas
defaultRouteMetric
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
➧virtualLinks
statistics
display
define
modify
➧remove
To Next Page
Loading...
