9-4 CHAPTER 9: ADMINISTERING VLANS
Modifying VLAN
Information
To modify VLAN information:
1 From the top level of the Administration Console, enter:
bridge vlan modify
2 Enter the number of the VLAN interface index.
3 Enter the protocol for that VLAN:
(IP, IPX, Apple, XNS, DECnet, SNA,
Vines, X.25, NetBIOS, default).
4 Enter the VLAN identifier.
5 Enter the VLAN name.
The system displays the port types.
6 Enter the numbers of the ports to modify or
all to modify all ports on
the VLAN.
7 If you have selected the IP protocol and want to use the Layer 3 address
information, enter
defined
If you do not want Layer 3 addressing, enter undefined
Example:
Select menu option (bridge/vlan): modify
Select VLAN interface [1-2]: 2
Protocol Suite (IP,IPX,Apple,XNS,DECnet,SNA,
Vines,X.25,NetBIOS,default): IP
Integer VLAN Identifier [1]: 2
VLAN Name [Sales]:
Ports 1=FDDI, 2-17=FastEthernet
Enter port(s) (1-17|all) [1-5]:
Layer 3 Address (undefined,defined) [undefined]:
Top-Level Menu
system
ethernet
fddi
atm
➧bridge
ip
ipx
appletalk
snmp
analyzer
script
logout
display
mode
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
stpState
stpFollowLinkState
stpPriority
stpMaxAge
stpHelloTIme
stpForwardDelay
stpGroupAddress
port
packetFilter
➧vlan
summary
detail
define
➧modify
remove
To Next Page
Loading...
