ProJet
®
x60 Series User Guide Post-Processing
3dscentral.3dsystems.com 37 All Rights Reserved
5/12/13
• Wear a lab coat or smock, gloves, face shield, or goggles.
• Apply in a well-ventilated area.
• Specialized containers are recommended for applying StrengthMax. Have a catch pan, waxed
paper, or plastic drop cloth available for catching spills.
• Label disposal materials and dispose of according to the label instructions.
• Wear a dust mask when sanding finished parts.
• Store StrengthMax in a cool, dry area.
For complete details on post-processing your part using StrengthMax, see the StrengthMax User Guide,
available at 3dscentral.3dsystems.com.
To Next Page
Loading...
