ZPrinter
®
850 User Manual Printer Maintenance
3dscentral.3dsystems.com 49 All Rights Reserved
5/12/13
6. Reach into the left end of the printer and wipe the Piston Screw clean of old grease, dust, etc.
7. Touch the grease gun to the Piston Screw and squeeze the trigger twice at the top of the Piston
Screw (under the Build Bed), and then squeeze the trigger once at the middle of the Piston Screw.
Number Component
1Waste Tray
2Piston Screw
3 Pocket for Cleaning Solution
Cartridge
To Next Page
Loading...
