ProJet
®
x60Pro Series User Guide
v All Rights Reserved
5/12/13
7.9.1 Part Colors Do Not Match PC Monitor Colors .................................. 72
7.9.2 Parts Broken After Automatic Gross Cleaning.................................. 72
7.10 Part Quality Issues - Streaky or Striped Parts, Delamination ................. 74
7.11 Part Quality Issues - Bad Surface Finish................................................ 75
7.11.1 Bad Horizontal Surface Finish ........................................................ 75
7.11.2 Bad Vertical Surface Finish ............................................................ 75
7.12 Miscellaneous Problems......................................................................... 76
7.12.1 Vacuum Has Low/No Suction......................................................... 76
7.12.2 Binder Cartridge is Full But 3DPrint Indicates Empty ..................... 77
7.13 Error Codes and Messages - Background Details.................................. 78
7.14 Additional Information............................................................................. 79
7.14.1 Materials ......................................................................................... 79
7.14.2 Service............................................................................................ 79
7.15 Calling for Service................................................................................... 79
To Next Page
Loading...
