3M Food Services Trade Department
3M Center
St. Paul, MN 55144-1000
Printed in U.S.A.
E3M 1995 March
78-6912-0508-8 Rev. A
Printed on 50% recycled
waste paper, including 10%
post-consumer waste paper.
Installation Instructions
Headset Storage Rack Kit
78-6911-4409-7
Introduction:
The headset storage rack provides safe, convenient storage of headsets that are not in use. Install sufficient
three-hook headset storage racks to ensure that all headsets are protected from inadvertent damage.
Kit Contents:
¯
Stationary track
¯
Movable hooks (3)
¯
End caps (2)
¯
Installation Instructions
Procedure:
1. Using screws and anchors appropriate for the surface the storage rack is to be attached to, mount the track in
an area that is away from heat, grease and moisture; preferably in a manager’s office.
2. Slide the movable hooks into the track and then snap the end caps in place.
3. Space the hooks as shown below, and hang the headsets on the hooks as shown -- without the battery packs.
To Next Page
Loading...
