3xLogic VISIX S-Series Installation Manual

Installation Manual v3.1 | VISIX S-Series Network Camera
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
3
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to prevent
serious injury or death.
Cautions Follow these precautions to prevent
potential injury or material damage.
Warnings:
 Please adopt the power adapter, which can meet the safety extra low voltage (SELV) standard. And source
with 12 VDC or 24 VAC (depending on models) according to the IEC60950-1 and Limited Power Source
standard.
 If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused
by unauthorized repair or maintenance.)
 To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
 This installation should be made by a qualified service person and should conform to all the local codes.
 Please install blackouts equipment into the power supply circuit for convenient supply interruption.
 Please make sure that the ceiling can support more than 5 Kgs of force if the camera is fixed to the ceiling.
 If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused
by unauthorized repair or maintenance.)

3xLogic VISIX S-Series Specifications

General

Brand	3xLogic
Model	VISIX S-Series
Category	Security Camera
Language	English