4NSYS 4CH - Camera Temper Detection

DIGITAL VIDEO RECORDER MANUAL
DIGITAL VIDEO RECODER MANUAL
47
[1] Motion : It is the setup for PTZ, pop-up, relay out, buzzer in motion detection
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.
[2] Sensor : It is the setup for PTZ, pop-up, relay out, buzzer in sensor triggering.
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.