EasyManuals Logo

A.R.C. Laser Nuvolas User Manual

A.R.C. Laser Nuvolas
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
User Manual NUVOLAS
April 2023
File: User Manual_NUVOLAS_rev3.docx 45
8.5.4 Error Messages
Door interlock not connected
Connect the interlock plug
included with the system / close
the door
Attention
Note error message or wait
Temperature too low
The environment is too cold for
operating the laser
Operating temperature too high
Please wait until laser cools
down to reach working
temperature
Air humidity too high
The laser should not be operated
in this environment
Fiber missing / or plugged
incorrectly
Plug in fiber
8.5.5 Status message
Please wait
8.6 Disposal
The relevant, locally applicable laws and regulations must be observed
during disposal. Under no circumstances should the device be disposed
of with domestic waste.
A.R.C. Laser GmbH is happy to assist with the disposal of the system;
Costs for the proper return of the laser to A.R.C. Laser GmbH is the
responsibility of the customer. Please contact our service department.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the A.R.C. Laser Nuvolas and is the answer not in the manual?

A.R.C. Laser Nuvolas Specifications

General IconGeneral
BrandA.R.C. Laser
ModelNuvolas
CategoryMeasuring Instruments
LanguageEnglish