A.R.C. Laser Nuvolas User Manual

User Manual NUVOLAS
April 2023
File: User Manual_NUVOLAS_rev3.docx 25
6 Operation
This part of the manual only describes the technical application of the device, without
going into the medical application.
Settings and adjustments should only be made in accordance with the user manual.
Changes or settings that are not described in this manual can lead to malfunctions.
The laser is in the READY mode during treatment. If you interrupt the treatment, the laser
must be returned to STANDBY mode. The device must always be switched off when
unattended to prevent operation by an unauthorized third party.
The front of the device consists of the following elements and buttons:
Fiber port
The NUVOLAS has a fiber port at the front of the device.
The fiber port is for connecting patented A.R.C. Laser fibers and probes only.
All fibers and probes which are marked with U.C. can be used without any restriction.
Laser emission LED
The laser emission LED indicates if laser radiation is emitted. If laser radiation is emitted
the laser emission LED lights up red.
READY LED
The READY-LED lights up if the READY mode is activated via the touchscreen. If the
READY mode is deactivated the READY-LED turns off.
A T T E N T I O N
Applicators for the NUVOLAS are labeled with U.C. (universal centering) on the
product label on their packaging.
Laser-Stop
with laser emission LED
Touch screen
Fiber connector with
dust protection
Error LED red
READY LED yellow
Laser on,
Status LED green

A.R.C. Laser Nuvolas Specifications

General

Brand	A.R.C. Laser
Model	Nuvolas
Category	Measuring Instruments
Language	English