SubCompact Board GENE-9455
Chapter 2 Quick Installation Guide 2-7
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Jumpers
Label Function
JP1 Clear CMOS
JP2 Front Panel
JP3 Touch Screen 4/5/8-wires Mode Selection (Optional)
JP4 LVDS Operating Voltage Selection
JP5 LCD Backlight Voltage Selection
JP6 COM2 RI/+5/+12V Selection1
JP7 LCD Backlight Voltage/PWM Control Selection
CN22 Pin 4-5 AT/ATX Selection (for +5V input version only)
To Next Page
Loading...
