SubCompact Board GENE-9455
Chapter 4 Driver Installation 4 -3
4.1 Installation:
Insert the GENE-9455 CD-ROM into the CD-ROM drive. And install
the drivers from Step 1 to Step 6 in order.
Step 1 – Install Chip Driver
1. Click on the Step 1 - INF Update Utility v8.2.0.1014 folder
and double click on the Setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the Step 2 - Intel Graphics Media Accelerator
Driver folder and select the OS folder your system is
2. Double click on the Setup.exe file located in each OS
folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 3 –Install LAN Driver
1. Click on the Step 3 - Intel Ethernet Driver folder and
select the OS folder your system is
2. Double click on the .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
To Next Page
Loading...
