Aaeon PCM-6893 - C O M P a C T B O a R D P C; Primary LCD Panel Connector (CN3)

Compact Board PCM- 6893
Chapter 2 Quick Installation Guide
2 - 16
Ethernet link signal LED
A continuously lit LED indicates good linkage between the
PCM-6893 and its supporting hub.
Ethernet speed signal LED
Flashing LED indicates the transfer speed (10Base-T or 100Base-Tx)
of the network.
Pin Signal Pin Signal
1 ACTIVE LED 2 VCC5SBY
3 SPEED LED 4 VCC5SBY
5 FULL LED 6 VCC5SBY
2.19 Primary LCD Panel Connector (CN3)
Pin Signal Pin Signal
1 +5V 2 +5V
3 GND 4 GND
5 +3.3V 6 +3.3V
7 ENVDD 8 GND
9 N.C 10 N.C
11 O_BLUE0 12 O_BLUE1
13 O_BLUE2 14 O_BLUE3
15 O_BLUE4 16 O_BLUE5
17 N.C 18 N.C
19 O_GREEN0 20 O_GREEN1
21 O_GREEN2 22 O_GREEN3
23 O_GREEN4 24 O_GREEN5
25 N.C 26 N.C
27 O_RED0 28 O_RED1
29 O_RED2 30 O_RED3