Handling Calls
41-001452-00 Rev 00 – 07.2011 126
Joining Additional Parties to Active Conferences
In centralized conferencing, you can join multiple incoming or outgoing calls to active conferences. Before following this
procedure, at least one active conference must exist on your phone.
Ending a Conference and Transferring Remaining Parties
The 6737i allows a Host to drop from a 3-way conference and let the other two parties remain connected by pressing a
Transfer key.
If you are the Host of a conference and want to leave that conference:
• While in a 3-way conference press the Transfer key on the phone.
Your phone leaves the 3-way conference but the remaining parties are still connected to the conference.
Ending Calls
To end a call, you first need to connect or reconnect to the call if not already connected (for example, if your caller is on hold).
Press or the line/call appearance key of the active call to end the call. If connected through the handset, you can
also place the handset back on hook to end the call.
1. As Party 1, pickup the handset or press the speakerphone key.
A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf Key.
5. Press the Line Key that has the active conference. (For example, Line 1 and Line 2 both have active conferences.
Pressing Line 1 joins Party 1 and Party 2 to the conference on Line 1. Pressing Line 2 joins Party 1 and Party 2 to the
conference on Line 2.)
6. Press the Conf Key again to join the Parties to the active conference.
Note:
The Caller ID of the dropped Host still displays on the remaining parties’ phones.
IP Phone UI
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
