Additional Features
175 41-001452-00 Rev 00 – 07.2011
Message Waiting Indicator
You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For example, if you
configure the MWI LED on line 3 only, the LED illuminates if a voice mail is pending on line 3. If you configure the MWI
LED for all lines, the LED illuminates if a voice mail is pending on any line on the phone (lines 1 through 9).
You configure the MWI indicator using the Aastra Web UI.
Configuring Message Waiting Indicator
Use the following procedure to configure the message waiting indicator on a specific line or on all lines on the IP phone
.
Aastra Web UI
Note:
"Message Waiting Indicator Line" parameter is set to ALL lines by default.
1. Click on Basic Settings->Preferences->General.
2. The "Message Waiting Indicator Line" field is set to ALL lines by default. If required, change the setting to a specific
line by selecting a line from the list. Valid values are All and lines 1 through 9.
3. Click Save Settings.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
