Line Keys and Softkeys
41-001452-00 Rev 00 – 07.2011 86
Flash Key
You can set a key to generate a flash event when it is pressed on the 6737i. You do this by setting the key to "flash". Th e IP
phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the call is
not on hold).
Configuring a Flash Key
Use the following procedure to configure a Flash key on the 6737i IP Phone. The procedure shows the softkey screen as an
example.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select "Flash".
4. In the "Label" field, enter a label to display on the phone for the key.
Expansion Module Keys
5. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
6. In the "Type" field, select "Flash".
7. (M675i) In the "Label" field, enter a label to display on the phone for the key.
8. Click Save Settings.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
