Handling Calls
41-001452-00 Rev 00 – 07.2011 122
Conferencing Calls
The 6737i IP phone offers two methods of conferencing:
• Local conferencing (default method).
• Centralized conferencing (for Sylantro and Broadsoft Servers) (Administrator must enable this method).
When you lift the handset on the phone, the Conference key displays on the bottom set of softkeys by default. Use this
key to create conference calls.
Screen that displays when handset is lifted
Local Conferencing
The 6737i phone supports up to 3 parties (including yourself) in a conference call. This is called Local Conferencing and is
the default method of conferencing on the 6737i.
Using Local Conferencing
Use the following procedure to create a conference call using local conferencing. Use the following illustration as a refer-
ence.
Note:
Your System Administrator can set your Conference key to speed dial a specific number. Contact your System Admin-
istrator for more information.
IP Phone UI
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key.
A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
L1
John Smith
Dial
Conf
Xfer More
>
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
