Aastra 6737i - Page 85

Line Keys and Softkeys
41-001452-00 Rev 00 – 07.2011 78
Configuring Group Call Pickup (GCP) Key (for Sylantro Servers)
Use the following procedure to configure Group Call Pickup on the 6737i IP Phone. The procedure shows the softkey
screens as an example.
6. In the "Line" field, select the line for which to apply the Directed Call Pickup configuration. Valid values are 1 through 9.
7. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
8. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
9. In the “Value” field, specify the extension you want to intercept when you press this softkey. For example: 2200.
10. (M675i) In the "Label" field, enter a label to apply to this Directed Call Pickup key.
11. In the "Line" field, select the line for which to apply the Directed Call Pickup configuration. Valid values are:
• global
• 1 through 9
12. Click Save Settings.
Aastra Web UI
Note:
A ring group must be configured on the Sylantro Server in order for a GCP key to function.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the “Type” field, select Directed Call Pickup.
4. In the "Label" field, enter a label to apply to this Group Call Pickup key.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846