Page 164 01/2007 AMT/PTD/PBX/0020/2/4/EN
9.2 Manage topology
MENU: 1.8.1 (Single-company management) or 1.9.1 (Multi-company management)
9.2.1 Declare the cells
This screen allows you to declare the cells that were defined during deployment. The maximum
number of cells is fixed at 128 (for a mono-site configuration) and 254 (for a multisite
configuration).
MENU: 1.8.1.1 (Single-company management) or 1.9.1.1 (Multi-company management)
9.2.2 DECT parameters
MENU: 1.8.1.3 (Single-company management) or 1.9.1.3 (Multi-company management)
Note:
For a multisite network, additional parameters appear, making it possible to define the
list of sites on which the mobile terminals will be registered, see Chapter 11.
WIRELESS: TOPOLOGY
1 NAMES OF FIRST CELLS
2 NAMES OF LAST CELLS
3 DECT PARAMETERS
NAMES OF FIRST CELLS
CELL 0 BUILD.A...
CELL 1 BUILD.F...
CELL 2 JPT.....
CELL 3 ........
CELL 4 ........
CELL 5 ........
...
CELL 15
........
DECT PARAMETERS
PARI VALUE 0 .....
RANDOM VAL RECORDED .....
RS VAL RECORDED .....
DIR. BEGINNING ASSIGNED TO PLL 999..
CLOCK SYNCHRON. PRIORITY MASTER
CURRENT STATE TRANSMITTER LOCAL CLK
To Next Page
Loading...
