Page 178 01/2007 AMT/PTD/PBX/0020/2/4/EN
10.2 Routing check
MMC "XACHEM , Object: Routing, Action: Display" is used to check local routing..
For a multi-site configuration check that the network ID field for local analysis is set to yes.
ROUTING AND ANALYSIS
Obj.=ROUTING. Action=Display
Routing=0..
-------------------------------------------------------------
Type of routing=LOCAL TO STANDARD SUBSCR.
Back-up routing for routings.=
=
Routing used for analysis= 902 952 962
=
=
=
=
=
Operation performed
ROUTING AND ANALYSIS
Obj.=ANALYSIS. Action=Display
Dialing to analyse=902......
-------------------------------------------------------------
Analyse=COMPLTD
Routing=0.. Access type=OTHER
Network ID=YES
Operation performed
To Next Page
Loading...
