ABB AC 800F

Process Station ABB FieldController 800
20
The following modules are available :
SA 801F Power supply 115 V AC / 230 V AC
SD 802F Power supply 24 V DC
AM 801F Battery module
AM 802F Debug module
EI 801F Ethernet module 10Base2 (Cheapernet)
EI 802F Ethernet module AUI
EI 803F Ethernet module Twisted Pair
FI 810F CAN-3 module
FI 820F Serial module
FI 830F Profibus module
When inserting a new object it is given a default name which represents the installation point.
When copying an object the name will adapt to the new position. When moving the existing name
will remain the same.
S:F1 FI830F (FI830F_4_F1)
S: Slot
FI830F Module type, Profibus module here
(FI830F 1_4_F1) Default name with station position 4, slot F1
5.4 Parameterization of AC 800F
The FieldController takes the fieldbus modules, thus enabling several fieldbusses to be con-
nected to this station, including different ones.
The station must be allocated to a resource (D-PS). This defines which software part of the user
program runs on which process station.
See also Engineering Manual, System Configuration, Hardware Structure.
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827