ABB AC 800F

Process Station ABB FieldController 800
34
6.3 Program list (PL)
Select project object program list → Project → Header
Processing
ON Selected program list is switched on, and with it all lower-level programs.
All function blocks with configured processing state set to ON are evaluated
with each task cycle.
ON Selected program list is switched off, and with it all lower-level programs.
Processing of all function blocks is terminated immediately.
OK OK exits the dialog box and returns to the project tree.
O
N Processing of program list is switched on.
OFF Processing of program list is switched off.
6.4 State displays in the project tree
In contrast to configuration, state information is maintained on project objects during commis-
sioning. This state information appears after each project object in brackets (like the object types)
and reflects the state of the process station. If arrows should appear before the nodes, these
project objects must first be loaded or reloaded into the station because of a configuration
change. An exclamation mark indicates that other objects at levels below the one so marked need
to be updated because of changes in their configuration.
ac016us.bmp
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827