Process Station ABB FieldController 800
3
Contents
Notes on this manual...................................................................................................................... 5
1 General.............................................................................................................................. 7
1.1 Introduction ........................................................................................................................ 7
1.2 System summary ............................................................................................................... 7
2 Loading the operating system and EPROM’S.............................................................. 9
2.1 Bootstrapping the Boot-EPROM’s ..................................................................................... 9
2.2 Loading the operating system.......................................................................................... 10
2.3 Loading the EPROM's of Profibus modules .................................................................... 10
3 Configuration of resource AC 800F in project tree.................................................... 11
3.1 Inserting a D-PS or D-PS/RED resource......................................................................... 12
3.2 Inserting a task or redundant task ................................................................................... 12
4 Processing and failure action ...................................................................................... 13
4.1 Automatic error handling at task level ............................................................................. 13
4.1 Task error messages ....................................................................................................... 14
4.2 Task error characteristics................................................................................................. 15
4.3 Startup and Shutdown Performance of the Modules ...................................................... 16
4.4 Power fail signal (PF) and no power fail .......................................................................... 16
4.5 Power fail signal (PF) and power fail ............................................................................... 16
4.6 Safety values for field devices ......................................................................................... 16
5 Configuration of process station AC 800F in the hardware structure .................... 17
5.1 Inserting Process Station AC 800F ................................................................................. 17
5.2 Process station AC 800FR redundant (new)................................................................... 18
5.3 Inserting modules in the AC 800F ................................................................................... 19
5.4 Parameterization of AC 800F .......................................................................................... 20
5.4.1 Module data of AC 800F.................................................................................................. 21
5.4.2 Location of AC 800F ........................................................................................................ 22
5.4.3 AC 800F Boot Parameters............................................................................................... 23
5.5 AC 800F Modules ............................................................................................................ 26
5.5.1 Power supply modulesSA 801F / SD 802F..................................................................... 26
5.5.2 Ethernet modules EI 801F, EI 802F, and EI 803F .......................................................... 27
5.5.3 Battery module AM 801F ................................................................................................. 27
5.5.4 Profibus module FI 830F ................................................................................................. 27
5.5.5 Serial Interface module FI 820F ...................................................................................... 27
5.5.6 CAN module FI 810F ....................................................................................................... 28
5.6 Diagnostic data for objects .............................................................................................. 28
5.6.1 STA Error codes ..............................................................................................................29
To Next Page
Loading...
Need help?
General
