178 EN – Quick start-up guide
If you want to make a backup of the settings made
so far, select Backup and press (Next).
If you do not want to make a backup, select Not
now and press (Next).
The first start is now complete and the drive is
ready for use.
Press (Done) to enter the Home view.
The Home view monitoring the values of the
selected signals is shown on the panel.
For changing the signals and their display style
shown in the Home view, see ACS-AP-x assistant
control panels user’s manual (3AUA0000085685
[English]).
2 – Additional settings in the Primary settings menu
Make any additional adjustments, for example,
pump protections, starting from the Main menu –
press (Menu) to enter the Main menu.
Select Primary settings and press
(Select)
(or ).
In the Primary settings menu, select Pump
protections and press
(Select) (or ).
To get more information on the Primary settings
menu items, press to open the help page.
To Next Page
Loading...
