ACS 300 User’s Manual 41
Chapter 6 - Control and Parameter Logic
Hold down to scroll up in Display and Setting modes.
Hold down to scroll down in Display and Setting modes.
Press to change up to the next parameter in Display mode
or
Press to increment the current parameter value in Setting mode.
Press to change
down
to the next parameter in Display mode
or
Press to decrement the current parameter value in Setting mode.
Press and hold both keys simultaneously for three seconds to move
directly to the OUTPUT f parameter.
LED’s Remote light indicates the ACS 300 is under remote control.
When the remote light blinks slowly, an option is selected as the master
device.
Direction light indicates the current motor rotation direction. When the
direction light flashes slowly, the ACS 300 is in Stop status. When the
direction light flashes fast, the ACS 300 is changing rotational direction.
Control
Panel Key
Secondary
Key
Function
To Next Page
Loading...
