ABB ACS 311-1P1-1 - Page 79

ACS 300 User’s Manual 71
Chapter 7 - Drive Parameters
VERSION Parameter Version displays the software version. For exam-
ple the software version could be CDS02B.2.
P. LOCK Parameter Lock prevents unauthorized persons from alter-
ing the parameters.
OPEN
The Parameter Lock is open allowing the parameter values
to be changed.
LOCKED
The Parameter Lock is active. The parameter values cannot
be changed, except parameters OUTPUT f and LOC REF.
Page 4 parameters
PAGE 4 (*P1) Press to change to Page 1.
Parameter set 2 parameters. These parameters are effec-
tive when parameter PSET is set “2” and digital input 5 is
active. These parameters are similar to the respective in
Pages 1 and 2.