ABB ACS800-04 - Fastening of the Back Mounting Plate

Drive module of frame size R7 with bottom exit
21
Fastening of the back mounting plate
7
0
m
m
(
2
.
7
6
i
n
.
)
Fasten the back mounting plate to the enclosure
frame at a distance of 70 mm from the back vertical
profiles. The attachment in the lower left-hand side
corner is shown here.
View of the enclosure ftame when the back mounting plate
(without the drive module) is fastened
70
m
m
Fastening
points of
the drive
module
ProE: White Currant / acs800-04-rittal_common.asm, _common_no_heat.asm