ABB ACS800-04 - View of Base Plates and Cable Lead-Throughs Fastened

Drive module of frame size R8
40
View of base plates and cable lead-throughs fastened
23 Install the C-rails and clamps for
cable strain relief.
24 Fasten the PE busbar.
The PE busbar is provided for
grounding of the input cable
shield and the motor cable shield
if the PE terminal of the drive
module is not used.
25 Fasten shrouds over all live parts.
Step Instruction Photo
P
E
b
u
s
b
a
r
Input cable lead-throughs
Control cable
lead-throughs
Motor cable lead-throughs