Drive module of frame size R7 with bottom exit and Rittal cooling unit
25
Layout of the installation
This photo shows the final installation with component placing dimensions in
millimetres and (inches).
Base plate
570 (22.44)
837 (32.95)
910 (35.83)
1080 (42.52)
1420 (55.91)
220 (8.66)
320 (12.60)
455 (17.91)
1520 (59.84) to the fastening points
The drive module is placed 30 mm (1.18 in.) from
the right-hand side panel. Fastening point distances
from the bottom of the back mounting plate are
shown.
Contactor
EMC filter *
RDCU
Switch fuse
Note: A mirrored layout is advantageous for
servicing the drive module.
EMC screen *
Cutting in the door for the
control panel mounting
platform: 115 × 240
(4.53 × 9.45)
PE
C-rail 600 mm
Side mounting plate
TS 8614.240
1100 mm × 300 mm
Punched section
TS 8612.160
(600 mm)
Punched section
TS 8612.160
C
-
r
ai
l
3
90
m
m
C
-
r
a
i
l
6
0
0
m
m
* required in first environment
installations only
user’s cabling
Power supply terminal
block of the cooling
unit
Auxiliary voltage
transformer
To Next Page
Loading...
