About this manual
12
For installation instructions of optional equipment, see their manuals.
For example installations in Rittal TS 8 cabinet, refer to ACS800-04/U4 Rittal TS 8
Cabinet Installation [3AFE68372330 (English)].
Categorization according to the frame size
The instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size R7 or R8. The
frame size is not marked on the drive designation label. To identify the frame size of
your drive, see the rating tables in chapter Technical data in ACS800-04/04M/U4
Hardware Manual [3AFE64671006 (English)].
Categorization according to the plus code
The instructions, technical data and dimensional drawings which concern only
certain optional selections are marked with plus codes, e.g. +E210 or +H354. The
options included in the drive can be identified from the plus codes visible on the type
designation label of the drive. The plus code selections are listed in chapter The
ACS800-04/U4 and ACS800-04M under Type code.
Contents
The chapters of this manual are briefly described below.
About this manual introduces this manual.
The ACS800-04/U4 and ACS800-04M describes the drive module.
Planning the cabinet installation instructs on general cabinet design, gives layout
examples, free space requirements around the drive module for cooling and cabinet
cooling data.
Mechanical installation of pre-assembled units (ACS800-04/U4) instructs how to
mount a pre-assembled drive module into a cabinet.
Mechanical installation of non-pre-assembled units (ACS800-04M) instructs how to
assemble the drive from the assembly kits.
Checking the installation helps in checking the mechanical and electrical installation
of the drive.
Dimensional drawings contains the dimensional drawings of the drive modules.
Circuit diagrams shows an example circuit diagram for employing the Prevention of
Unexpected Start function (+Q950).
Assembly drawings contains a few step-by-step assembly drawings.
To Next Page
Loading...
