Parameters 179
Mot bearing Pre-selectable alarm for the drive run time counter. 5
44.32 kWh inv lim Sets the limit for the energy counter. The counter monitors
signal 01.24 kWh inverter (see page 64). When the signal
reaches the limit, the alarm specified by parameter 44.33
kWh inv alm sel is given.
0 … 2147483647 Alarm limit for the energy counter. 1 = 1 kWh
44.33 kWh inv alm sel Selects the alarm for the energy counter.
Device clean Pre-selectable alarm for the energy counter. 1
Add cool fan Pre-selectable alarm for the energy counter. 2
Cabinet fan Pre-selectable alarm for the energy counter. 3
Dc-capacitor Pre-selectable alarm for the energy counter. 4
Mot bearing Pre-selectable alarm for the energy counter. 5
45
45 Energy optimising
Energy optimization settings.
45.01 Energy optim Enables/disables energy optimization function. The function
optimizes the flux so that total energy consumption and motor
noise level are reduced when the drive operates below the
nominal load. The total efficiency (motor and drive) can be
improved by 1…10% depending on load torque and speed.
Disable Energy optimization disabled. 0
Enable Energy optimization enabled. 1
45.02 Energy tariff1 Price of energy per kWh. Used for reference when savings
are calculated. See parameters 01.35 Saved energy, 01.36
Saved amount and 01.37 Saved CO2.
0.00 …
21474836.47
Price of energy per kWh. 1 = 1
45.06 E tariff unit Specifies the currency used for the savings calculation.
Local The currency is determined by the setting of parameter 99.01
Language.
0
Eur Euro. 1
Usd US dollar. 2
45.08 Pump ref power Pump power when connected directly to supply. Used for
reference when energy savings are calculated. See
parameters 01.35 Saved energy, 01.36 Saved amount and
01.37 Saved CO2.
00.0… 1000.0% Pump power in percent of nominal motor power. 1 = 1
45.09 Energy reset Resets the energy counters 01.35 Saved energy, 01.36
Saved amount and 01.37 Saved CO2.
Done Reset not requested (normal operation). 0
Reset Reset energy counters. The value reverts automatically to
Done.
1
No. Name/Value Description FbEq
To Next Page
Loading...
