ABB DCS 600 - DCS 600 MultiDrive - a new generation of power converters

1 DCS 600 MultiDrive - a new generation of power converters
❖ state-of-the-art technology
❖ flexible design
❖ user-friendliness
Basic hardware complements
❋ Thyristor bridge(s) (from 900 A with leg fuses
installed)
❋ Temperature monitor for the thyristor bridge(s)
❋ Fan
❋ Power supply for the electronics
❋ Microprocessor board
❋ AMC ( A pplication M otor C ontrol) board with
DSP ( D igital S ignal P rocessor) for drive con-
trol and DDCS link
Additional components for integration in the
module
❋ Field supply converter
 uncontrolled full wave diode bridge, 6A or
 half-controlled diode/thyristor bridge, 16A
❋ Control panel
Moreover, the accessories listed below can be
used to individually customize the drive package
in accordance with the application intended
❋ External field supply units
❋ 12-Pulse parallel configuration
❋ 12-Pulse serial configuration
❋ Additional I/O boards
❋ Interface modules for various communication
protocol
❋ EMC filter(s)
❋ PC programs
C1 - Module Switchgear cubicle
ABBs long years of experience with variable-
speed DC drives, plus use of the latest state-of-
the-art technologies, have combined to create
this new product. The DCS 600 MultiDrive con-
stitutes a complete program for ratings between
25 A and 5150 A as a power converter module,
suitable for all commonly used three-phase sys-
tems.
Our products of course have CE approvals , and
also comply with the stipulations laid down in the
DIN EN ISO 9001 quality management system.
DCS 500 Drives are approved according to CSA
( C anadian S tandards A ssociation) and NRTL/C.
DCS 600 MultiDrive converter units are suitable
for system drive applications.
Appropriate PC programs ensure that the drives
are human-engineered for user-friendly operator
control.
Unit range
The range comprises of 4 sizes, C1, C2, C3 and C4.
We can deliver both modules and standard
cubicles in MNS-design.
II F 1-1
R
NRTL /C