Communication protocol 145
13 Fault Code Get The fault that caused the last
transition to the Faulted state.
DRIVECOMM codes are
reported. See the drive
manual for further information
on the DRIVECOMM codes.
UINT16
14 Warning Code Get Code word indicating a
warning. If multiple warnings
are present, the lowest code
value is displayed.
DRIVECOMM codes are
reported. See the drive
manual for further information
on DRIVECOMM codes.
UINT16
15 CtlFromNet Get 0 = NetControl disabled
1 = NetControl enabled
BOOL
16 DNFaultMode Get, Set 2 = Vendor specified UINT8
17 ForceFault Get, Set 0
→ 1 forces the drive to
fault
BOOL
# Attribute
name
Services Description Data
type
To Next Page
Loading...
