EasyManua.ls Logo

ABB IRB 2600ID - Page 38

ABB IRB 2600ID
466 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Elimination/ActionDescriptionWarning
For lifetime reasons always drain
as much oil as possible from the
gearbox. The magnetic oil plugs
will gather residual metal chips.
Contaminated oil in
gearboxes
Hazards related to batteries
Under rated conditions, the electrode materials and liquid electrolyte in the batteries
are sealed and not exposed to the outside.
There is a hazard in case of abuse (mechanical, thermal, electrical) which leads
to the activation of safety valves and/or the rupture of the battery container. As a
result under certain circumstances, electrolyte leakage, electrode materials reaction
with moisture/water or battery vent/explosion/fire may follow.
Do not short circuit, recharge, puncture, incinerate, crush, immerse, force discharge
or expose to temperatures above the declared operating temperature range of the
product. Risk of fire or explosion.
Operating temperatures are listed in Operating conditions, robot on page 48.
See safety instructions for the batteries in Material/product safety data
sheet - Battery pack (3HAC043118-001).
Unexpected movement of robot arm
WARNING
Hazards due to the use of brake release devices and/or gravity beneath the
manipulator shall be considered.
A robot may perform unexpected limited movement.
WARNING
Manipulator movements can cause serious injuries on users and may damage
equipment.
Related information
See also the safety information related to installation and operation.
38 Product manual - IRB 2600
3HAC035504-001 Revision: AD
© Copyright 2009-2023 ABB. All rights reserved.
1 Safety
1.6.1 Safety during maintenance and repair
Continued

Table of Contents

Related product manuals