ABB PVS-50-TL - Mounting the Inverter on the Bracket

- 57 -
000867AG
5 - Installation
Mounting of the inverter on the bracket
The mounting bracket can be used to install the inverter on a vertical or horizontal support.
• Position the bracket
01
per-
fectly level on the support
and use it as drilling template.
• It is the installer’s responsibi-
lity to choose an appropriate
number and and distribution of
attachment points. The choi-
ce must be based on the type
of support (wall, frame or other
support), the type of anchors to
be used, and their ability to sup-
port 4 times the inverter’s weight
(4x70Kg=280Kg for all models).
Attach the bracket to the wall with
at least 10 attachment screws.
Depending on the type of anchor
chosen, drill the required 10 ho-
les (minimum)
A
to mount the
bracket. Put at least four screws
in the upper side and at least four
in the lower side (see example in
the illustration)
• Fix the bracket to the support.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
01
01 01
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
01 01
01