ABB PVS-50-TL

- 88 -
000873AG
5 - Installation
Front cover closure
After terminating the connection and conguration of the inverter and
before commissioning, the inverter’s front cover must be closed.
It is necessary to ensure the correct closing of the cover to maintain the IP protection degree
of the inverter
- Carefully close the cover.
- Insert the key in the key lock
08
- Turn the key lock
08
in “LOCK”
- Repeate the operation for the other key lock
08
Commissioning of the inverter can be started once the cover have been
closed
IP65
PVS-60
1
2
3
OPEN
LOCK