IEC16000076 V1 EN-US
Figure 37: OPENCLOSE_LED connected to SXCBR
5.3 Keypad
AMU0600428 v17
The LHMI keypad contains push-buttons which are used to navigate in different views
or menus. The push-buttons are also used to acknowledge alarms, reset indications,
provide help and switch between local and remote control mode.
The keypad also contains programmable push-buttons that can be configured either as
menu shortcut or control buttons.
Section 5 1MRK 505 370-UUS A
Local HMI
102 Busbar protection REB670 2.2 ANSI
Application manual
To Next Page
Loading...
