2.4 Control and monitoring functions
GUID-E3777F16-0B76-4157-A3BF-0B6B978863DE v15
IEC 61850 or
function name
ANSI Function description Busbar
REB670
(Customized)
Control
SESRSYN 25 Synchrocheck, energizing check and synchronizing 0-3
SMBRREC 79 Autorecloser 0-2
APC30 3 Control functionality for up to 6 bays, max 30 objects
(6CBs), including interlocking (see Table
4)
0-1
QCBAY Bay control 1+5/APC30
LOCREM Handling of LR-switch positions 1+5/APC30
LOCREMCTRL LHMI control of PSTO 1
SXCBR Circuit breaker 24
SLGAPC Logic rotating switch for function selection and LHMI
presentation
15
VSGAPC Selector mini switch 30
DPGAPC Generic communication function for Double Point
indication
16
SPC8GAPC Single point generic control function 8 signals 5
AUTOBITS Automation bits, command function for DNP3.0 3
SINGLECMD Single command, 16 signals 4
I103CMD Function commands for IEC 60870-5-103 1
I103GENCMD Function commands generic for IEC 60870-5-103 50
I103POSCMD IED commands with position and select for IEC
60870-5-103
50
I103POSCMDV IED direct commands with position for IEC 60870-5-103 50
I103IEDCMD IED commands for IEC 60870-5-103 1
I103USRCMD Function commands user defined for IEC 60870-5-103 4
Secondary system
supervision
FUFSPVC Fuse failure supervision 0-2
VDSPVC 60 Fuse failure supervision based on voltage difference 0-2
Logic
TMAGAPC Trip matrix logic 12
ALMCALH Logic for group alarm 5
Table continues on next page
Section 2 1MRK 505 370-UUS A
Application
42 Busbar protection REB670 2.2 ANSI
Application manual
To Next Page
Loading...
