ABB REF615 J User Manual

2.1.2 PCM600 and IED connectivity package version
• Protection and Control IED Manager PCM600 Ver. 2.6 or later
• RED615 Connectivity Package Ver. 4.1 or later
• REF615 Connectivity Package Ver. 4.1 or later
• REM615 Connectivity Package Ver. 4.1 or later
• RET615 Connectivity Package Ver. 4.1 or later
• REU615 Connectivity Package Ver. 4.1 or later
Download connectivity packages from the ABB Website
http://www.abb.com/substationautomation or directly with the
Update Manager in PCM600.
2.2 Local HMI
The LHMI is used for setting, monitoring and controlling the IED. The LHMI
comprises the display, buttons, LED indicators and communication port.
1YHT530004D05 D Section 2
615 series overview
615 series 35
Technical Manual

ABB REF615 J Specifications

General

Type	Feeder Protection Relay
Nominal Frequency	50/60 Hz
Rated Current	1 A / 5 A
Binary Outputs	Up to 8
Communication Protocols	IEC 61850, Modbus, DNP3
Mounting	Flush mounting
Protection Functions	Overcurrent, Earth fault, Under/Over voltage
Operating Temperature	-25°C to +55°C
Ingress Protection	IP54
Weight	Approximately 1.5 kg