ABB REF615 J User Manual

7.1.10 Technical revision history
Table 530: SSCBR Technical revision history
Technical revision Change
B Added the possibility to reset spring charge time
and breaker travel times
C Removed the DIFTRVTOPALM and
DIFTRVTCLALM outputs and the corresponding
Open Dif alarm time and Close Dif alarm time
setting parameters
D The Operation cycle setting parameter renamed
to Initial CB Rmn life . The IPOW_A (_B, _C)
range changed.
1YHT530004D05 D Section 7
Condition monitoring functions
615 series 623
Technical Manual

ABB REF615 J Specifications

General

Type	Feeder Protection Relay
Nominal Frequency	50/60 Hz
Rated Current	1 A / 5 A
Binary Outputs	Up to 8
Communication Protocols	IEC 61850, Modbus, DNP3
Mounting	Flush mounting
Protection Functions	Overcurrent, Earth fault, Under/Over voltage
Operating Temperature	-25°C to +55°C
Ingress Protection	IP54
Weight	Approximately 1.5 kg