EasyManua.ls Logo

ABB Relion 670 series - Page 1360

ABB Relion 670 series
1432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22.5.5 Type tests according to standard
IP16288-1 v1
M16706-1 v13.1.1
Table 1057:Electromagnetic compatibility
Test Type test values Reference standards
1 MHz Oscillatory burst disturbance 2.5 kV IEC 60255-26
100 kHz slow damped oscillatory wave
immunity test
2.5 kV IEC 61000-4-18, Class III
Ring wave immunity test, 100 kHz 2-4 kV IEC 61000-4-12, Class IV
Surge withstand capability test 2.5 kV, oscillatory
4.0 kV, fast transient
IEEE/ANSI C37.90.1
Electrostatic discharge
Direct application
Indirect application
15 kV air discharge
8 kV contact discharge
8 kV contact discharge
IEC 60255-26
IEC 61000-4-2, Class IV
Electrostatic discharge
Direct application
Indirect application
15 kV air discharge
8 kV contact discharge
8 kV contact discharge
IEEE/ANSI C37.90.1
Fast transient disturbance 4 kV
2 kV, MIM mA-inputs
IEC 60255-26, Zone A
IEC 60255-26, Zone B
Surge immunity test
2-4 kV, 1.2/50ms high energy
1-2 kV, BOM and IRF outputs
IEC 60255-26, Zone A
IEC 60255-26, Zone B
Power frequency immunity test 150-300 V IEC 60255-26, Zone A
Conducted common mode immunity test 15 Hz-150 kHz IEC 61000-4-16, Class IV
Power frequency magnetic field test 1000 A/m, 3 s
100 A/m, cont.
IEC 61000-4-8, Class V
Pulse magnetic field immunity test 1000 A/m IEC 61000–4–9, Class V
Damped oscillatory magnetic field test 100 A/m IEC 61000-4-10, Class V
Radiated electromagnetic field
disturbance
20 V/m, 80-1000 MHz
1.4-2.7 GHz
IEC 60255-26
Radiated electromagnetic field
disturbance
20 V/m
80-1000 MHz
10 V/m, 5.1-6.0 GHz
IEEE/ANSI C37.90.2
EN 50121-5
Conducted electromagnetic field
disturbance
10 V, 0.15-80 MHz IEC 60255-26
Radiated emission 30-5000 MHz IEC 60255-26
Radiated emission 30-5000 MHz IEEE/ANSI C63.4, FCC
Conducted emission 0.15-30 MHz IEC 60255-26
Table
1058:
Insulation
Test
Type test values Reference standard
Dielectric test 2.0 kV AC, 1 min.
1.0 kVrms, 1 min.)
IEC 60255-27
ANSI C37.90
IEEE 802.3-2015,
Environment A
Impulse voltage test
5 kV, 1.2/50ms, 0.5 J
1 kV, 1.2/50 ms 0.5 J
Insulation resistance
> 100 MW at 500 VDC
Section 22 1MRK 502 066-UUS B
IED hardware
1354
Technical manual

Table of Contents

Other manuals for ABB Relion 670 series

Related product manuals