ABB Relion 670 series - Authorization with CAM-Enabled IED

Section 2 Available functions
2.1 Main protection functions
GUID-66BAAD98-851D-4AAC-B386-B38B57718BD2 v12.1.1
Table 2: Example of quantities
2 = number of basic instances
0-3 = option quantities
3-A03 = optional function included in packages A03 (refer to ordering details)
IEC 61850 ANSI Function description Generator
REG670
(Customized)
Differential protection
T2WPDIF 87T Transformer differential protection, two winding 0-2
T3WPDIF 87T Transformer differential protection, three winding 0-2
HZPDIF 87 1Ph high impedance differential protection 0-6
GENPDIF 87G Generator differential protection 0-2
REFPDIF 87N Restricted earth fault protection, low impedance 0-3
Impedance protection
ZMQPDIS,
ZMQAPDIS
21 Distance protection zone, quadrilateral characteristic
ZDRDIR 21D Directional impedance quadrilateral
FDPSPDIS 21 Phase selection, quadrilateral characteristic with fixed
angle
ZMHPDIS 21 Fullscheme distance protection, mho characteristic 0-4
ZDMRDIR 21D Directional impedance element for mho characteristic 0-2
FMPSPDIS 21 Faulty phase identification with load enchroachment
ZMRPDIS,
ZMRAPDIS
21 Distance protection zone, quadrilateral characteristic,
separate settings
FRPSPDIS 21 Phase selection, quadrilateral characteristic with fixed
angle
ZMFPDIS 21 High speed distance protection, quadrilateral and
mho - 6 zones
0–1
ZMFCPDIS 21 High speed distance protection for series
compensated lines, quadrilateral and mho - 6 zones
0–1
PSPPPAM 78 Pole slip/out-of-step protection 0-1
OOSPPAM 78 Out-of-step protection 0-1
LEXPDIS 40 Loss of excitation 0-2
Table continues on next page
1MRK 502 066-UUS B Section 2
Available functions
57
Technical manual