ABB Relion 670 series - Basic IED Functions

IEC 61850 ANSI Function description Generator
REG670
(Customized)
Process bus communication IEC 61850-9-2
1)
PRP IEC 62439-3 parallel redundancy protocol 0-1
Remote communication
Binary signal transfer receive/transmit 6/36
Transmission of analog data from LDCM 1
Receive binary status from remote LDCM 6/3/3
1) Only included for 9-2LE products
2.5 Basic IED functions
GUID-C8F0E5D2-E305-4184-9627-F6B5864216CA v9
Table 6: Basic IED functions
IEC 61850 or function
name
Description
INTERRSIG
SELFSUPEVLST Self supervision with internal event list
TIMESYNCHGEN Time synchronization module
BININPUT, SYNCHCAN,
SYNCHGPS,
SYNCHCMPPS,
SYNCHLON,
SYNCHPPH,
SYNCHPPS, SNTP,
SYNCHSPA
Time synchronization
TIMEZONE Time synchronization
DSTBEGIN,
DSTENABLE, DSTEND
GPS time synchronization module
IRIG-B Time synchronization
SETGRPS Number of setting groups
ACTVGRP Parameter setting groups
TESTMODE Test mode functionality
CHNGLCK Change lock function
SMBI Signal matrix for binary inputs
SMBO Signal matrix for binary outputs
SMMI Signal matrix for mA inputs
SMAI1 - SMAI12 Signal matrix for analog inputs
3PHSUM Summation block 3 phase
ATHSTAT Authority status
ATHCHCK Authority check
AUTHMAN Authority management
FTPACCS FTP access with password
Table continues on next page
1MRK 502 066-UUS B Section 2
Available functions
65
Technical manual