ABB Relion 670 series - Error Messages in Central Account Management

IEC 61850 ANSI Function description Generator
REG670
(Customized)
RS485GEN RS485 1
DNPGEN DNP3.0 communication general protocol 1
DNPGENTCP DNP3.0 communication general TCP protocol 1
CHSERRS485 DNP3.0 for EIA-485 communication protocol 1
CH1TCP, CH2TCP,
CH3TCP, CH4TCP
DNP3.0 for TCP/IP communication protocol 1
CHSEROPT DNP3.0 for TCP/IP and EIA-485 communication
protocol
1
MST1TCP,
MST2TCP,
MST3TCP,
MST4TCP
DNP3.0 for serial communication protocol 1
DNPFREC DNP3.0 fault records for TCP/IP and EIA-485
communication protocol
1
IEC 61850-8-1 Parameter setting function for IEC 61850 1
GOOSEINTLKRCV Horizontal communication via GOOSE for interlocking 59
GOOSEBINRCV GOOSE binary receive 16
GOOSEDPRCV GOOSE function block to receive a double point value 64
GOOSEINTRCV GOOSE function block to receive an integer value 32
GOOSEMVRCV GOOSE function block to receive a measurand value 60
GOOSESPRCV GOOSE function block to receive a single point value 64
MULTICMDRCV,
MULTICMDSND
Multiple command and transmit 60/10
FRONT, LANABI,
LANAB, LANCDI,
LANCD
Ethernet configuration of links 1
GATEWAY Ethernet configuration of link one 1
OPTICAL103 IEC 60870-5-103 Optical serial communication 1
RS485103 IEC 60870-5-103 serial communication for RS485 1
AGSAL Generic security application component 1
LD0LLN0 IEC 61850 LD0 LLN0 1
SYSLLN0 IEC 61850 SYS LLN0 1
LPHD Physical device information 1
PCMACCS IED Configuration Protocol 1
SECALARM Component for mapping security events on protocols
such as DNP3 and IEC103
1
FSTACCS
FSTACCSNA
Field service tool access via SPA protocol over ethernet
communication
1
ACTIVLOG Activity logging parameters 1
ALTRK Service Tracking 1
SINGLELCCH Single ethernet port link status 1
PRPSTATUS Dual ethernet port link status 1
Table continues on next page
Section 2 1MRK 502 066-UUS B
Available functions
64
Technical manual