15.6.1.2 Signals
PID-3437-INPUTSIGNALS v4
Table 607: AND Input signals
Name Type Default Description
INPUT1 BOOLEAN 1 Input signal 1
INPUT2 BOOLEAN 1 Input signal 2
INPUT3 BOOLEAN 1 Input signal 3
INPUT4 BOOLEAN 1 Input signal 4
PID-3437-OUTPUTSIGNALS v4
Table 608: AND Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
15.6.1.3 Technical data
GUID-D1179280-1D99-4A66-91AC-B7343DBA9F23 v1
Table 609: Number of AND instances
Logic block Quantity with cycle time
3 ms 8 ms 100 ms
AND 60 60 160
15.6.2 Controllable gate function block GATE
IP11021-1 v2
M11489-3 v2
The Controllable gate function block (GATE) is used for controlling if a signal should be able to
pass from the input to the output or not depending on a setting.
15.6.2.1 Function block
M11490-3 v2
IEC04000410-2-en.vsd
GATE
INPUT OUT
IEC04000410 V2 EN-US
Figure 492: GATE function block
15.6.2.2 Signals
PID-3801-INPUTSIGNALS v4
Table 610: GATE Input signals
Name
Type Default Description
INPUT BOOLEAN 0 Input to gate
1MRK 502 066-UUS B Section 15
Logic
957
Technical manual
To Next Page
Loading...
