Quick start-up guide
22
RETA-02 Vendor and PROFIdrive objects should be available in
the product catalog.
Figure 3. Product catalog
Example 1: PLC configuration in Vendor mode
PPO 6 consists of 10 input and output parameters. Eight of the
inputs and outputs are freely configurable parameters. The first
four of them can be mapped either with the bus configuration
parameters or the initial record data of the PLC. The last four
inputs and outputs can be mapped only with the initial record data
of the PLC. In this example the bus configuration parameters are
used to map the first four and initial record data the last four of the
input and output parameters.
To Next Page
Loading...
